Philips Pronto Professional TSU9600 – Review

Philips Pronto TSU9600

I’ve had the new Philips Pronto Professional TSU9600 for a little over a week now so I thought it was time for some initial impressions.

The Hardware Picking it up for the first time, the unit is probably smaller and lighter than you’d imagine. The finish is glossy piano black with a silver brushed effect surround. The stylus stores inside the unit like a PDA or SmartPhone, but it doesn’t lock into place very well, although I haven’t needed to use it so far apart from calibrating the screen on initially booting the device. The 3.7″ 640×480 (VGA) screen is beautiful, as you’d expect in an £800 remote, and it sits flush with its surround which helps to give it a great viewing angle. The tilt sensor brings on the backlight when its lifted just like the Sonos controller. There are over 20 hard keys around the unit which are on the whole excellent. It’s great to have a proper cursor pad in particular when using it with devices like TiVo. Strangely the scroll ring around the cursor pad is currently only used for Escient media servers and is un-addressable in the software for any other device. I’ve also find the hard keys directly under the screen for Play, Stop Pause etc are a little too small.

Click Pic For Larger Version

Click Pic For Larger Version

Click Pic For Larger Version

Click Pic For Larger Version

The charging base is set on a clear acrylic slab and it is lit with a white LED which looks quite nice. A red LED also glows when the unit is on the cradle and accepting charge. The manual recommends keeping the unit on it’s base station at all times when it’s not in use, in reality I’ve had no issues at all with battery life despite heavy use while setting it up.

The 9600 ships with support for the Escient Fireball Media Servers and Lutron RadioRa lighting and curtain controls. Hopefully Philips will add to the range of professional equipment supported out of the box in the future. Imagine the possibilities if they would release protocol information so users could create their own plugins to control the huge range of lighting and smart home products with the units built in wifi capabilities.

The Software The unit ships with a pre-configured file for either a single room or multi-room setup. Using this standard file is a good starting point for creating your own. Creating your own Pronto configuration is a bit like recording a piece of music or editing a video; you never really finish it, you just get to a point where you are happy enough to release it, even though you know you could go on adding stuff and tweaking it pretty much for ever. After spending around 12 hours on my setup I now have a system that can be used by all the family, including the six year old. With half a dozen devices, graphics logos of TV channels and plenty of macros there’s still 90% of the Pronto’s 256 meg of RAM free.

Click Pic For Larger Version

At the heart of the system is the “Factory Database” with over 3,000 brands of equipment. The database still needs some work categorising devices as quite a lot are still listed under generic code table names rather than model numbers. However, I found every single device I needed in this database, including those for an eight year old Seleco CRT projector meaning I didn’t have to learn a single code for my setup! You copy codes from this factory DB into “My Database” which then makes them accessible for programming.

Philips are making a lot of the “Designed by installers” aspect of the new remote and like the Harmony range, this has led to the activity based method of control rather than just device control. In other words you launch activities like “Watch Live TV” or “Listen to Music”. This makes great sense and is exactly the way we used our old Pronto RU890 (just forced into retirement by the arrival of the TSU9600 after almost 7 years sterling service).

The new Pronto Edit Professional software is the first I have used where you cannot download the configuration file from the remote back into the PC. This is supposedly to protect installers from having their work copied. An installer can also do a “pack and go” to turn the configuration file (new .XCF extension) into an .exe so they can be emailed to a customer. This way the end user just runs the file to update their Pronto, without ever having to see the Pronto Edit Professional software. What ever way you look at it you there’s a lot of potential for heartache if you don’t keep a backup copy of your .XCF file in a safe place.

The new software uses .png files for its graphics which are high quality and support transparency. Philips have just released a New gallery which includes more TV station icons for the US, UK and Europe. Several special navigation commands are in PEP, one of the really useful ones is “Browse Back” which allows the remote to jump back to the panel you came in from. This simplifies a lot navigation issues that used to occur in older models. Another new feature is support for wave files (.wav, 44 kHz, 16 bit, mono). You can now play a sound effect of your choice on a key-press or in a macro etc.

PEP is a Windows only package (no Mac or Linux support) and currently it won’t run under Windows Vista, but with the Vista launch only days away now surely it can’t be long until a new version is released that will fix that.

Extenders The real power of the TS9600 comes with the addition of its two extender products.

The RFX9400 Wireless Extender provides 4 individually addressable IR ports and up to 16 of these extenders can be incorporated in a single network. The remote can communicate directly to the wireless extender or via a WiFi access point/router. The Prontos wifi is of the 802.11g flavour and includes support for 64 and 128 bit WEP, but not WPA. You can give the unit a fixed IP and it also supports DHCP. There is no browser or any other Internet use of the unit currently (unlike the old iPronto). This seems like a wasted opportunity, especially as I could control my Sonos system with the Pronto using one of the home brew web interfaces that are around now. But with the remote running a flavour of the Linux OS there’s a chance that someone will be able to hack the unit if Philips don’t decide to add a browser themselves in the future.

The RFX9600 Advanced Serial Extender is a hardwired extender that plugs into your wired LAN and fits into a 19″ rack. It includes wired discrete control (RS232) ports. Currently these are one-way serial ports but it appears the hardware is two-way capable and hopefully Philips will enable this in a future firmware upgrade. The RFX9600 also includes power sensing and relay switching (4 relay outputs) for curtain and projector screen control for example. Also included are 4 individually addressable IR ports which is a god send for anyone wanting to run multiple Sky boxes for example.

The Video Here’s a little YouTube video of the remote in action. Most of the delay with the “System On” macro comes from my LG LCD TV being slow to start. You can make out the animation on the screen during the power off macro at the end which is made up of several different screen which you put into your macro at various point to get the effect of the progress bar moving.

Conclusion £800 buys you a lot of kit these days, maybe a nice 37″ LCD television for example. But then again £800 doesn’t buy you much in the way of a colour touchscreen controller from any of the big name home automation companies, and that’s where Philips scores with the TSU9600. It’s a quality device that, with an extender, can become the centre of an entire smart home system. It didn’t just take the Innovation Award for nothing at the 2007 Consumer Electronics Show.

Available from Amazon

No products found.

Click Pic For Larger Version

+ Superb VGA TouchScreen
+ Huge Database of IR codes
+ Wired and Wireless Extenders
+ Over 20 Hard Buttons
+ Return command – to jump back to previous panel
+ Ships with high quality configuration file
+ Support for custom sound files
+ Includes Dock/Charger
+ USB Connection (not serial)

– Play, Stop, Pause hard buttons too small
– Doesn’t have a browser
– Stylus doesn’t lock in properly
– Doesn’t work in Vista currently

Last update on 2024-04-08 / Affiliate links / Images from Amazon Product Advertising API

11 Comments on "Philips Pronto Professional TSU9600 – Review"

  1. I just got one of these and the codes for our 60″ pioneer Plasma were not in the factor database. What rubbuish! Does anyone know how to update the factor database as I certianly don’t want to have to add all that in manually after forking out so much money for supposidly the best remote control?

  2. Philips cannot be expected to have every single code in their database. This device is designed for custom installers (you pay them to set it up) for those who are prepared to configure it themselves – You need to learn teh codes from the original remote, to teach the 9600 the codes.

  3. This is a very difficult piece of equipment for the average person to program. I had to get help from a professional and it is still not completely working the way I want it to work. The unit is nice looking but I have noticed that it is best to keep it on the charger. I only purchased it for TV (several) programming. I have several TV’s of the same brand and couldn’t find a devise that would work each individually. This Pronto does the trick! I do not have a whole house lighting system etc. I have since found other less expensive controllers that would work.

  4. The clue is in the title; Pronto professional. Programming is intuitive for those who do this for a living and this is what philips designed it for. Infact its route to market is slightly restricted to help make sure that professionals set it up for “clients”. There are certification courses to train professionals. I have programmed about a dozen of these and they are a superb solution when comapared to the cost and time required to set up a Crestron or AMX control platform.

    KNX, the only worldwide standard for intelligent building control.

  5. Does anyone know of a media system that pairs the pronto to a Mac? Brought the pronto last year and told the supplier / programmer I wanted to pair it up with an external HD linked to a Mac. Was promised it would work. Now I am told there is only a windows based media program.

  6. way overpriced get a logitech harmony 1000 or 1100 their help is unsurpassed by anyone in the world and free

  7. While the Harmony 1100 is a nice remote (we have one here currently for review), I’m afraid you can’t compare it to the TSU9600.

    The Philips unit is in an entirely different league. Have a look at our recent piece on the new Comfort ProntoScript for example. That allows the TSUs to emulate the alarms keypad, as well as displaying your CCTV pictures on it’s screen…

    Then there’s the RF and Serial Extenders on top. Of course if all you need is universal remote without all the home automation capabilities of the TSU9600 then the Harmony 1100 may be perfect for you.

  8. Hi,
    Does anyone know how many different devices can be controlled? The manual says nothing about this. I assume it is not unlimited! 🙂

  9. i need 2 pronto tsu9600 dock charger`s where can i buy them

  10. No there’s no real limit to the number of devices you can have just the size of the overall program. It’s certainly been enough to do 10+ devices with multiple pages of buttons, graphics and macros and still have plenty of room left over in my experience.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.