Last updated: December 22, 2012
1 min read
Table of content
Was this helpful?
Micro Module Dimmer
Last updated: December 22, 2012
Table of Contents
Andy Powell spotted these new modules on the IntelliHome website.
“The TMD4 accepts up to four momentary switches by wire leads, and transmits up to four sequential X-10 power line carrier DIM/BRIGHT and ON/OFF commands. MicroModules use two-way X-10 communication. Marmitek MicroModules are designed to fit in the rear of European junction boxes, behind any installed switch or outlet.”… A similar device (TMA4) is also available. Like the TMD4 it supports up to 4 switches.
“The TMA4 connects up to four maintained switches by wire leads and transmits up to four sequential X-10 powerline carrier ON/OFF addresses. MicroModules use two-way X-10 communication. Marmitek MicroModules are designed to fit in the rear of European junction boxes, behind any installed switch or outlet.”
Send feedback to Automated Home
We appreciate you taking the time to share your feedback about this page with us.
Whether it's praise for something good, or ideas to improve something that
isn't quite right, we're excited to hear from you.
Lucky you! This thread is empty,
which means you've got dibs on the first comment.
Go for it!