Last updated: January 30, 2013
1 min read
Table of content
Was this helpful?
Muxlab Active Baluns Send Component and IR Over Single CAT5
Last updated: January 30, 2013
Table of Contents
The new VideoEase Active Component Video Balun Kit from Muxlab sends component plus infra red control signals across a single CAT5e / CAT6 cable. The system is rated at around 150 metres for a 1080P signal and over 300 metres at 480p and is shipping now.
[googlead]”The Active Component Video Balun Kit allows component video, analog stereo audio and/or digital audio, and one IR-emitter signal to be transmitted via a cost-effective unshielded copper twisted cable in a point-to-point configuration. The product supports simultaneous stereo audio and digital audio transmission. The product provides an IR-emitter pass-through connectivity, supports up to 1080p resolution, and features manual brightness and sharpness adjustments. Applications include digital signage, residential, boardroom, classroom, and home theatre video systems.
Features & Benefits
- Up to 1,000 ft (305m) via Cat5E/6 @ 480i/p
- Up to 500 ft (152m) via Cat5E/6 @ 1080p
- Supports simultaneous stereo and digital audio
- IR-Emitter pass-through
- Manual brightness compensation
- Manual sharpness compensation
- Ground Loop isolation”
2 comments on “Muxlab Active Baluns Send Component and IR Over Single CAT5”
Send feedback to Automated Home
We appreciate you taking the time to share your feedback about this page with us.
Whether it's praise for something good, or ideas to improve something that
isn't quite right, we're excited to hear from you.
interesting …
was looking for a review that compared digital & analogue video image quality when going via Cat-5e – eg; HDMI vs Component – including effects of distance – say 10m, 30m, 50m – ideally with various makes of converter / balun … not found anything yet …
well i think muxlub is a good product and would like to get updates.