Last updated: April 10, 2020
1 min read
Table of content
Was this helpful?
Qubino Z-Wave Plus Weather Station
Last updated: April 10, 2020
Table of Contents
Qubino’s smart home Weather Station has 4 sensors which can measure 10 different data points.
The Wind Gauge is powered by a solar panel and measures wind direction, wind velocity, wind gust, wind chill and temperature. The Rain Gauge measures, you guessed it, rainfall and the 2 Thermo-Hygro sensors can measure indoor / outdoor temperature and indoor / outdoor humidity.
RELATED: Popp Z-Wave Weather Station
A special USB transceiver provides the gateway between the 433 MHz sensors and your Z-Wave Plus network.
The remote weather sensors include two Thermo-Hygrometers (with LCD display), Anemometer (Wind Sensor) and Rain Sensor. All data collected by the sensors are transmitted to the Weather Station USB Key by wireless RF. Due to USB Key which acts as a converter all 10 values (end points) from sensors are presented in Z-Wave network
One comment on “Qubino Z-Wave Plus Weather Station”
Send feedback to Automated Home
We appreciate you taking the time to share your feedback about this page with us.
Whether it's praise for something good, or ideas to improve something that
isn't quite right, we're excited to hear from you.
I had been looking for a new weather station as mine finally succumbed to the weather. I need to figure out if I can get the data to http://www.wunderground.com