Last updated: December 19, 2012
1 min read
Table of content
Was this helpful?
Sensor Switch do X10
Last updated: December 19, 2012
Table of Contents
“NEWS!! Now available with momentry output for connection to X10 etc…
The Multi-way Sensor Switch is a new concept in “one”, “two” (or more) way light switch operation and consists of a small controller housing that can be hidden in the ceiling cavity, either behind the light rose or adjacent to a relevant junction box, allied to satellite Multi-way Sensor Switches. The Multi-way Sensor Switches themselves operate on only 5volts DC, and can utilize existing cabling. Only 2 wires per switch are used. The PCB of the sensor is no bigger than a postage stamp so the switching sites can be very un-obtrusive if necessary. This means that the cabling within the walls is only carrying this low voltage and is therefore very safe. Up-to 6 Multi-way Sensor Switches can be used to operate each controller and there is the provision to include an additional conventional switch or dimmer switch in the circuit. The multi-way circuit uses a relay that is contained within the controller housing to operate the switching function. If a dimming function is required, the insertion of a BIKKEL (see relevant leaflet) into the circuit, will allow this.”
Send feedback to Automated Home
We appreciate you taking the time to share your feedback about this page with us.
Whether it's praise for something good, or ideas to improve something that
isn't quite right, we're excited to hear from you.
Lucky you! This thread is empty,
which means you've got dibs on the first comment.
Go for it!