The Evohome App you always wanted!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • philchillbill
    Automated Home Legend

    • Jan 2017
    • 1723

    #91
    Originally posted by jweaver View Post

    PWA App? as in from the brower? If so, this is absolutely impossible... I only sent a command from the Skill.

    The last time I launched the Browser app was a month or so back when I was showing someone the temperatures in the house...
    On 2026-10-19T14:24:51.229Z (so 13:24 your local time) the PWA was launched with your credentials. Only the dashboard displayed, no clicks or user-interaction. What type of device do you use it from? It may habe been open in a forgotten browser tab if you're the type of user that keeps tons of tabs permanently open.

    Comment

    • philchillbill
      Automated Home Legend

      • Jan 2017
      • 1723

      #92
      "Insanity is doing the same thing over and over again and expecting different results."

      The PWA has been updated to log people out and display a React toast whenever a TCC authorization failure occurs. Apparently, for some people a big red APL screen telling you that you need to re-auth is just something to hit the back-button for and re-trigger the error dozens of times in the hope it will magically resolve itself. The problem with doing that is all it does is potentially get you blacklisted by Resideo for hitting their auth server too often for a standard refresh even though they've refused refresh and require re-auth. So now the PWA will log you out when this happens so there's no longer a back-button inside the PWA to hammer in vain...

      Comment

      • jweaver
        Automated Home Ninja

        • Jan 2023
        • 466

        #93
        Originally posted by philchillbill View Post

        On 2026-10-19T14:24:51.229Z (so 13:24 your local time) the PWA was launched with your credentials. Only the dashboard displayed, no clicks or user-interaction. What type of device do you use it from? It may habe been open in a forgotten browser tab if you're the type of user that keeps tons of tabs permanently open.
        Yes.. But this is is 12 hours AFTER the event.. My problem happed at 2am on the 19th, this login was 14:24... I suspect I launched the app at this time to check that it was working whilst looking to understand the issue.

        When I said "the last time I used the app", I was talking about before this happened.. Now the heating is back on, I am obviously using it... But before then, I stopped in April, and only used it once during the summer to look at the temps in the house.

        Comment

        • philchillbill
          Automated Home Legend

          • Jan 2017
          • 1723

          #94
          In light of the 2x PHP zero-day vulnerabilities currently being patched all over the globe, in an abundance of caution I have blocked all php script-execution on both domains. This makes logins/re-auths/account-creation impossible, although the PWA and skill will continue to run uninterrupted. Sorry for any inconvenience.

          UPDATE: Because my provider has taken all shared hosting offline, the app no longer works as it needs to fetch non-PHP data from my server. As soon as they have updated PHP for all their clients (i.e. me) it should come back itself. No timeline currently known.

          EDIT: It's all back online again
          Last edited by philchillbill; 22 October 2026, 09:25 PM.

          Comment

          • philchillbill
            Automated Home Legend

            • Jan 2017
            • 1723

            #95
            There's new behaviour for users who use the Home Assistant connector. It used to be so that if HA didn't return a full response for all the components of your system, the fallback was to ignore any partial HA results and fall back entirely on the TCC query's results. That meant that a single zone not reporting would lose 0.1deg resolution and demand on all your zones.

            What now happens is that HA results are used to their fullest extent and TCC values are only dropped in to the specific parameters that HA did not provide. The extra query to TCC when that is needed will result in a little extra latency. Also, HA errors are now reported as a list instead of only mentioning the first-encountered error.

            It's only live in the PWA for now but if there seem to be no issues with it then I'll port the changes to the skill also in a few days.

            Comment

            • philchillbill
              Automated Home Legend

              • Jan 2017
              • 1723

              #96
              Click image for larger version

Name:	Screenshot 2026-11-02 203004.png
Views:	47
Size:	33.5 KB
ID:	87379

              There's a new button in the Setpoint Editor labelled Override. It unblocks the Duration button without having first had to modify any tiles, although if you have edited any and not yet submitted changes they will be pre-highlighted for you when you choose Override. In this mode you can toggle tiles to include/exclude them and while they are included their setpoint (or on/off state for DHW) can be further modified. If you toggle any tiles to exclude them then their SP returns to what it was at the outset when you launched the editor. If any tiles are highlighted you can select the Duration slider and apply it to only the selected tiles, whether or not they were modified setpoint-wise.

              This allows you to e.g. extend or shorten existing overrides whose SP/state you like but whose duration needs tweaking (and remember, sliding the duration-slider fully right gets you a PermanentOverride). It can also be useful if one of the Smart Weather features has left you with SPs that you like and you want to hold them for a while longer.

              Double-clicking for coasting or override-cancellation is disabled in override-mode. Incidentally, it is a toggle and tapping it again turns the mode back off.

              Thanks to Dean for suggesting the feature and for testing it very thoroughly indeed

              You'll also notice that the popups that result on almost all screens when you tap the HELP button in the bottom lefthand corner will now have scrollbars and that in some cases the help-text is longer and clearer. The launchpad screen also hijacked the new lime-green-while-active paradigm for its rightmost 3 buttons in the footer.​

              Comment

              • philchillbill
                Automated Home Legend

                • Jan 2017
                • 1723

                #97
                Click image for larger version

Name:	Screenshot 2026-11-08 194025.png
Views:	29
Size:	44.3 KB
ID:	87393

                There's a new feature in the Offsets sub-screen of the Settings screen addressing Smart Weather. See https://automatedhome.com/vbulletin/...ings-detection If either of the 2 new toggles is toggled on, EvoControl will try to figure out when either ColdWeatherBoost or WarmWeatherSaver is likely active and the relevant icon will then show up on your dashboard tiles.​

                Comment

                • philchillbill
                  Automated Home Legend

                  • Jan 2017
                  • 1723

                  #98
                  The Web App now supports English, German, Dutch, French and Italian. You'll see the 2 new languages in the Language section inside the Settings page. If you don't see them there then clear the browser cache and reload.

                  The website at https://evocontrol.eu is now also available in all 5 languages.

                  Comment

                  Working...
                  X