Somebody
Automated Home Guru
Last Activity: 17 January 2026, 12:00 AM
Joined: 23 February 2019
Location:
-
I added ramses-esp to my Home Assistant set up, and a Stored Hot Water sensor was added. Interestingly, the Stored HW is more precise/has higher 0.1°... -
Just to add whilst the previous post is awaiting modulation, I am not changing the System Mode (i.e for heating), but the HW Operation Mode.Leave a comment:
-
Not in my set up, it doesn't. My relevant commands are:
- action: water_heater.set_operation_mode
target: entity_id: water_heater.domestic_hot_water...Leave a comment:
-
I'm guessing when turning back to Auto mode the CS92 is interrogated for the temperature?
I only started the automation after 22:30 last...Last edited by Somebody; 2 January 2026, 07:47 PM.Leave a comment:
-
I don't have a packet sniffing stick in my setup so using the IoT cloud-polling Evohome integration which has no option to set the HW set point. I was...Last edited by Somebody; 2 January 2026, 04:13 PM.Leave a comment:
-
I will run an automation every 30 minutes outside the HW schedules to turn on Off mode for 4 minutes then back to Auto and see if it's any better. Thanks...Leave a comment:
-
A thought, Bruce.............Howabout I run a script periodically in Home Assistant, say every 30 minutes outside of the heating schedules, to turn the...Leave a comment:
-
Hi Bruce
Could you give more details as to your set up please? How it's wired up etc? Pics would be great too if possible.
...Leave a comment:
-
Appliance control means direct boiler control. I asked Resideo support why I didn't have Load Scaling in my controller and was informed that it only applied...Last edited by Somebody; 31 December 2025, 04:08 PM.Leave a comment:
No activity results to display
Leave a comment: